ThinkEdge SE455 V3 M.2 Air Baffle Kit
See this document for information about the ThinkEdge SE455 V3 M.2 Air Baffle Kit.
This option kit comes with the following components.
1
One rear half of the M.2 air baffle
2
One front half of the M.2 air baffle
3
Two M3 screws
NOTE
- The illustration in this document might differ slightly from your hardware.
Option installation
- To install the option, refer to: "Install the M.2 air baffle" in SE455 V3 User Guide
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
Option installation | |
---|---|
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. |
First Edition (May 2021)
© Copyright Lenovo 2021.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925