ThinkSystem V3 1U Supercap Holder Kit
See this document for information about the ThinkSystem V3 1U Supercap Holder Kit.
This option kit comes with the following component.
1 1U super capacitor holder
NOTE
The illustration in this document might differ slightly from your hardware.
Option installation
- To install the option, refer to the applicable user guide:
| Server model | Hardware installation | Internal cable routing |
|---|---|---|
| SR630 V3 | RAID flash power module replacement | Internal cable routing |
| SR635 V3 | RAID flash power module replacement | Internal cable routing |
| SR645 V3 | RAID flash power module replacement | Internal cable routing |
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
| Option installation | |
|---|---|
| To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
| For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. | |
First Edition (March 2023)
© Copyright Lenovo 2023.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925