ThinkSystem V3 1U Supercap Holder Kit for PCIe Slot
See this document for information about the ThinkSystem V3 1U Supercap Holder Kit for PCIe Slot.
This option kit comes with the following components.
1 MS low-profile riser cage
2 Gen 4 x16 riser2
3 Super capacitor holder for a PCIe slot
NOTE
The illustration in this document might differ slightly from your hardware.
Option installation
- To install the option, refer to the applicable user guide:
| Server model | Hardware installation | Internal cable routing |
|---|---|---|
| SR630 V3 | RAID flash power module replacement | Internal cable routing |
| SR635 V3 | RAID flash power module replacement | Internal cable routing |
| SR645 V3 | RAID flash power module replacement | Internal cable routing |
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
| Option installation | |
|---|---|
| To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
| For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. | |
First Edition (March 2023)
© Copyright Lenovo 2023.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925