V4 Internal USB I/O Board Kit

See this document for information about the V4 Internal USB I/O Board Kit.

This option kit comes with the following components.

1 One USB I/O board

2 One M3 screw

NOTE

The illustration in this document might differ slightly from your hardware.

Option installation

• To install the option, refer to

  Server model	Hardware installation
  SR630 V4	Install the USB I/O board
  SR650 V4	Install the USB I/O board
  SR650a V4	Install the USB I/O board
  SR860 V4	Install the USB I/O board
  SR850 V4	Install the USB I/O board

• For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.

Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (May 2021)

© Copyright Lenovo 2021.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925