ThinkSystem SR650a V4 Front GPU High Watts Riser Cage

See this document for information about the ThinkSystem SR650a V4 Front GPU High Watts Riser Cage.

The option kit comes with the following components.

1 Two front high watts GPU riser cages

2 Four M3.5 screws for riser cages

3 One front high watts GPU air duct

4 Four M3 screws for high watts GPU adapters

NOTE

• The illustration in this document might differ slightly from your hardware.

Option installation

• To install the option, refer to:
  • "Install a front high watts GPU riser assembly" in SR650a V4 User Guide
  • "Install the front high watts GPU air duct" in SR650a V4 User Guide
  • "Internal cable routing" in SR650a V4 User Guide

• For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.

Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (May 2021)

© Copyright Lenovo 2021.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925