ThinkSystem SR950 V3 2 x16 FH Gen5 PCIe Riser option kit

See this document for information about the ThinkSystem SR950 V3 2 x16 FH Gen5 PCIe Riser option kit.

This option kit comes with the following components.

1 One riser card

2 Four screws

3 One power cable

NOTE

• The illustration in this document might differ slightly from your hardware.
• The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

• To install the option, refer to:
  • "Install the PCIe riser card" in SR950 V3 User Guide
  • "Internal cable routing" in SR950 V3 User Guide
• For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.

Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (October 2024)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925