Skip to main content

ThinkSystem NVIDIA ConnectX-7 NDR200/HDR QSFP112 2-port PCIe Gen5 x16 InfiniBand Adapter (SharedIO) DWC

See this document for information about the ThinkSystem NVIDIA ConnectX-7 NDR200/HDR QSFP112 2-port PCIe Gen5 x16 InfiniBand Adapter (SharedIO) DWC.

This option kit comes with the following components.

ThinkSystem NVIDIA ConnectX-7 NDR200/HDR QSFP112 2-port PCIe Gen5 x16 InfiniBand Adapter (SharedIO) DWC

1 ConnectX-7 NDR 200 PCIe shared I/O adapter​

2 Interface plate​

3 Putty pad (between interface plate and PCIe shared I/O adapter)​

4 Putty pad (between interface plate and PCIe shared I/O adapter)​

5 Two screws​

6 Six Phillips #2 screws​

7 Clamp bracket​

8 Hex standoff screw​

NOTE
  • The illustration in this document might differ slightly from your hardware.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (February 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925