ThinkSystem D3 Chassis Rack Shipping Bracket for 28.31” deep racks
See this document for information about the ThinkSystem D3 Chassis Rack Shipping Bracket for 28.31” deep racks.
This option kit comes with the following components.
1 One left rear shipping bracket
2 One right rear shipping bracket
3 Four screws
NOTE
- The illustration in this document might differ slightly from your hardware.
Option installation
- To install the option, refer to the applicable user guide:
| Server model | Hardware installation |
|---|---|
| SD530 V3 | Install the chassis to the rack |
| SD550 V3 | Install the chassis to the rack |
| SD535 V3 | Install the chassis to the rack |
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
| Option installation | |
|---|---|
| To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
| For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. | |
First Edition (April 2024)
© Copyright Lenovo 2024.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925