ThinkEdge SE450 Port Dust Cover Kit
See this document for information about the ThinkEdge SE450 Port Dust Cover Kit.
This option kit comes with the following components.
1 One RJ-45 filler
2 Six antenna port fillers
3 Two antenna covers
4 One external diagnostic handset connector filler
5 Two security bezel fillers
6 Three USB Type-A fillers
7 One VGA cover
NOTE
- The illustration in this document might differ slightly from your hardware.
Option installation
- To install the option, refer to: "Front view" in SE450 Setup Guide
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
| Option installation | |
|---|---|
| To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
| For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. | |
First Edition (May 2021)
© Copyright Lenovo 2021.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925