ThinkSystem SD535 V3 PCIe Riser Kit

See this document for information about the ThinkSystem SD535 V3 PCIe Riser Kit.

This option kit comes with the following components.

1 One 1U PCIe riser cage and cabled riser card (MCIO x16, 340 mm)

2 One riser power cable (power 2x8 to power 2x4, 360 mm)

3 One PCIe filler (vented)

4 One screw

NOTE

• The illustration in this document might differ slightly from your hardware.
• The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

• To install the option, refer to:
  • "Install a PCIe riser assembly" in SD535 V3 User Guide
  • "Internal cable routing" in SD535 V3 User Guide
• For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.

Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (May 2021)

© Copyright Lenovo 2021.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925