ThinkSystem SR860 V3 6 x8 PCIe G4 Riser 2 HHHL Option Kit
See this document for information about the ThinkSystem SR860 V3 6 x8 PCIe G4 Riser 2 HHHL Option Kit.
This option kit comes with the following components.
1
One 6 x8 HHHL Gen4 riser
2
One HH riser extender
3
Four screws
4
Two riser signal cables (320 mm)
5
Two riser signal cables (500 mm, flat 140 mm)
6
Two riser signal cables (440 mm, flat 140 mm)
NOTE
- The illustration in this document might differ slightly from your hardware.
- The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.
Option installation
- To install the option, refer to:
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
Option installation | |
---|---|
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. |
First Edition (May 2023)
© Copyright Lenovo 2023.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925