ThinkSystem SR665 V3 x8/x8 PCIe Gen4 Riser 3 Option Kit
See this document for information about the ThinkSystem SR665 V3 x8/x8 PCIe Gen4 Riser 3 Option Kit.
This option kit comes with the following components.
1
Gen4 x8/x8 riser 3 assembly
- One 2FH Gen4 riser cage
- One Gen4 x8/x8 riser card
- Two M3.5 screws
2
One C1 rearwall bracket
3
Four M3 screws
4
One riser 3 power cable, 150 mm
5
One riser 3 sideband cable, 120 mm
6
One MCIO x8 to MCIO x8 cable, 330 mm
7
Two MCIO x8 to MCIO x8 cables, 250 mm
8
One MCIO x8 to MCIO x4*2 cable, 330 mm
NOTE
- The illustration in this document might differ slightly from your hardware.
- The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.
Option installation
- To install the option, refer to:
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
Option installation | |
---|---|
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. |
First Edition (February 2023)
© Copyright Lenovo 2023.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925