ThinkSystem V3 2U x16/x16/E PCIe G5 Riser 1/2 Option Kit
See this document for information about the ThinkSystem V3 2U x16/x16/E PCIe G5 Riser 1/2 Option Kit.
This option kit comes with the following components.
1
Gen5 x16/x16/E riser 1/2 assembly
- One 3FH riser cage
- One Gen5 x16/x16/E riser card
- Two M3.5 screws
2
Two PCIe slot sequence labels
- One PCIe label (1-3)
- One PCIe label (4-6)
NOTE
The illustration in this document might differ slightly from your hardware.
Option installation
- To install the option, refer to the applicable user guide:
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
Option installation | |
---|---|
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. |
First Edition (February 2023)
© Copyright Lenovo 2023.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925