Skip to main content

ThinkSystem V3 1U PCIe G4 Riser1 LP Option Kit

See this document for information about the ThinkSystem V3 1U PCIe G4 Riser1 LP Option Kit.

This option kit comes with the following components.

ThinkSystem V3 1U PCIe G4 Riser1 LP Option Kit

1 One x16 PCIe G4 riser 1​

2 One 1U LP riser cage with filler​

3 One 1U FH riser cage​

4 Four screws​

NOTE
  • The illustration in this document might differ slightly from your hardware.
  • Install the riser 1 card to the LP riser cage. And install a riser 2 card to the FH riser cage. To get a G4 riser 2 card, go to "ThinkSystem V3 1U x16 PCIe G4 Riser 2 Option Kit".
  • An additional order for the riser 2 card will be needed.

Option installation

  • To install the option, refer to the applicable user guide:
Server modelHardware installation
SR630 V3Install a rear riser card
SR635 V3Install a rear riser card
SR645 V3Install the rear riser card
Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (February 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925