Skip to main content

ThinkSystem SD535 V3 CFF RAID Card Cable Kit

See this document for information about the ThinkSystem SD535 V3 CFF RAID Card Cable Kit.

This option kit comes with the following components.

ThinkSystem SD535 V3 CFF RAID Card Cable Kit

1 One RAID signal cable (Low-profile SlimSAS x8 to SlimLine x8, 150 mm)​

2 One RAID power cable (Micro-Fit 3.0 power 2x5 to Micro-Fit 3.0 power 2x5, 150 mm)​

3 One RAID SAS/SATA cables (Slimline x4 to SlimSAS x4, 460 mm)​

4 One RAID SAS/SATA cables (Slimline x4 to SlimSAS x4, 560 mm)​

5 One flash power module holder​

6 One flat head screw​

7 One HEX head screw​

NOTE
  • The illustration in this document might differ slightly from your hardware.
  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

  • To install the option, refer to:
Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (May 2021)

© Copyright Lenovo 2021.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925