ThinkSystem ST50 V3/ST45 V3 Internal Drive Cable Kit

See this document for information about the ThinkSystem ST50 V3/ST45 V3 Internal Drive Cable Kit.

This option kit comes with the following components.

1 One power cable for bay 0-1 drives, 300 mm + 80 mm

2 One power cable, 300 mm + 210 mm + 120 mm

• ST50 V3: for 3.5" drive (bay 2) and slim ODD
• ST45 V3: for 3.5" drive (bay 2) and slim ODD or 3.5" drive (bay 2) and 3.5" drive (bay 3)

3 One power cable for bay 3 drive of ST50 V3, 380 mm

4 One SATA signal cable for 3.5" drive (bay 2) or slim ODD, 520 mm

5 One internal RAID/HBA drive cable, 460 mm/420 mm/440 mm/440 mm

NOTE

• The illustration in this document might differ slightly from your hardware.

• The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

• To install the option, refer to the applicable user guide:

  • "Internal cable routing" in ST50 V3 User Guide
  • "Internal cable routing" in ST45 V3 User Guide

• For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.