ThinkSystem SR630 V2 Re-timer Cable Kit

See this document for information about the ThinkSystem SR630 V2 Re-timer Cable Kit.

The option kit contains the following items.

1 PCIe cable, 780 mm

• Quantity: 1
• From: Backplane
• To: Re-timer card
• Scenario: Used when the re-timer card is installed in PCIe slot 1.

2 SAS/SATA cable, 650 mm

• Quantity: 1
• From: Backplane
• To: System board
• Scenario: Used when SAS/SATA hard drives are expected to be installed.

3 SAS/SATA cable, 850 mm

• Quantity: 1
• From: Backplane
• To: System board

4 PCIe cable, 920 mm

• Quantity: 1
• From: Backplane
• To: Re-timer card
• Scenario: Used when the re-timer card is installed in PCIe slot 2.

NOTE

• The illustration in this document might differ slightly from your hardware.
• The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

• To install the option, refer to:
  • "Install a PCIe adapter" in SR630 V2 User Guide
  • "Internal cable routing" in SR630 V2 User Guide
• For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.