ThinkSystem SR645 Retimer cable kit
See this document for information about the ThinkSystem SR645 Retimer cable kit.
This option kit comes with the following components.
1 One signal cable for retimer card in slot 2 (635 mm)
2 One signal cable for retimer card in slot 2 (880 mm)
3 Two signal cables for retimer card in slot 1 (730 mm)
- The illustration in this document might differ slightly from your hardware.
- The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.
- To install the option, refer to:
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
|To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.|
|For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.|
First Edition (May 2022)
© Copyright Lenovo 2022.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925