Skip to main content

ThinkSystem SR655 V3 M.2 SATA/NVMe Cable Kit

See this document for information about the ThinkSystem SR655 V3 M.2 SATA/NVMe Cable Kit.

This option kit comes with the following components.

ThinkSystem SR655 V3 M.2 SATA/NVMe Cable Kit

1 One M.2 to MCIO x8 cable, 750mm

2 One M.2 power and signal cable, 330 mm/270 mm

3 One MB to M.2/7mm backplane Y cable, 750 mm/580 mm

4 One 7mm SSD power cable, 210 mm

5 One MB to M.2/12*3.5 backplane Y cable, 750 mm/380 mm

  • The illustration in this document might differ slightly from your hardware.
  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website

First Edition (March 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925