ThinkSystem SR665 V3 2.5" Chassis Rear Backplane NVMe Cable Option Kit
See this document for information about the ThinkSystem SR665 V3 2.5" Chassis Rear Backplane NVMe Cable Option Kit.
This option kit comes with the following components.
1 One power cable, 370 mm
2 One MCIO x8 to MCIO x8 cable, 250 mm
3 One MCIO x8 to MCIO x4*2 cable, 270 mm
4 One SlimSAS x8 to SlimSAS x4 cable, 450 mm
5 One SlimSAS x8 to SlimSAS x4*2 cable, 390 mm/650 mm
6 One Mini-SAS HD x8 to SlimSAS x4*2 cable, 390 mm/650 mm
7 Two MCIO x8 to MCIO x8 cables, 120 mm
- The illustration in this document might differ slightly from your hardware.
- The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.
- To install the option, refer to:
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
|To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.|
|For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.|
First Edition (February 2023)
© Copyright Lenovo 2023.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925