ThinkSystem SR850 V3/SR860 V3 M.2 SATA/x4 NVMe Cable Option Kit
See this document for information about the ThinkSystem SR850 V3/SR860 V3 M.2 SATA/x4 NVMe Cable Option Kit.
This option kit comes with the following component.
![ThinkSystem SR850 V3/SR860 V3 M.2 SATA/x4 NVMe Cable Option Kit](/files/cable_kit_options/sr860v3-609-suo-200.png)
1
Two M.2 SATA/NVMe cables
2
One M.2 boot adapter to CPU signal cable
3
One M.2 boot adapter to PCH signal cable
NOTE
- The illustration in this document might differ slightly from your hardware.
The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.
Option installation
- To install the option, refer to the applicable user guide:
Server model | Hardware installation | Internal cable routing |
---|---|---|
SR850 V3 | Install the M.2 boot adapter | Internal cable routing |
SR860 V3 | Install the M.2 boot adapter | Internal cable routing |
![](/img/logo.png)
Option installation | |
---|---|
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. |
First Edition (June 2023)
© Copyright Lenovo 2023.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925