Skip to main content

SR665 2.5" Chassis 24x NVMe Retimer Cable Kit

See this document for information about the SR665 2.5" Chassis 24x NVMe Retimer Cable Kit.

This option kit comes with the following components.

SR665 2.5" Chassis 24x NVMe Retimer Cable Kit

1 One PCIe cable (800 mm / 810 mm)

2 One PCIe cable (880 mm / 890 mm)

3 One PCIe cable (1020 mm / 1030 mm)

4 Three power cables (170 mm)

5 One PCIe cable (880 mm / 900 mm)

6 One PCIe cable (870 mm)

7 One PCIe cable (760 mm)

8 One PCIe cable (770 mm)

9 One PCIe cable (770 mm / 780 mm)

  • The illustration in this document might differ slightly from your hardware.
  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website

First Edition (November 2022)

© Copyright Lenovo 2022.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925