Skip to main content

ThinkSystem SR665 3.5" Chassis Middle Backplane NVMe cable kit

See this document for information about the ThinkSystem SR665 3.5" Chassis Middle Backplane NVMe cable kit.

This option kit comes with the following components.

ThinkSystem SR665 3.5-inch Chassis Middle Backplane NVMe cable kit

1 Power X cable (1)​

  • From PWR1 (Riser2) and PWR2 (Riser2)
  • To PWR (BP5) and PWR (BP6)

2 On-board to middle 4 x 2.5" NVMe Bay1 (1)​

  • From PCIe1 (MB) and PCIe2 (MB)
  • To NVMe0-1 (BP5)

3 On-board to middle 4 x 2.5" NVMe Bay1 (1)​

  • From PCIe3 (MB)
  • To NVMe2-3 (BP5)

4 On-board to middle 4 x 2.5" NVMe Bay2 (2)​

  • From PCIe7 (MB) or PCIe8 (MB)
  • To NVMe0-1 (BP6) or NVMe2-3 (BP6)
NOTE

The illustration in this document might differ slightly from your hardware.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

Second Edition (March 2024)

© Copyright Lenovo 2021, 2024.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925