ThinkEdge SE450 M.2 SATA/NVMe RAID Adapter Cable
See this document for information about the ThinkEdge SE450 M.2 SATA/NVMe RAID Adapter Cable.
This option kit comes with the following component.
1 One M.2 RAID adapter cable, 190mm/190mm
NOTE
- The illustration in this document might differ slightly from your hardware.
The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.
Option installation
- To install the option, refer to: "Install the M.2 drives and boot adapter" in SE450 Setup Guide
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
| Option installation | |
|---|---|
| To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
| For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. | |
First Edition (May 2021)
© Copyright Lenovo 2021.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925