ThinkSystem SD520 V4 PCIe RAID Enablement Kit

See this document for information about the ThinkSystem SD520 V4 PCIe RAID Enablement Kit.

This option kit comes with the following components.

1 One flash power module holder

2 One backplane SATA cable (645/715 mm)

3 One flash power module cable (380 mm)

NOTE

• The illustration in this document might differ slightly from your hardware.
• The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

• To install the option, refer to:
  • "Install a flash power module" in SD520 V4 User Guide
  • "Internal cable routing" in SD520 V4 User Guide
• For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.

Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (November 2024)

© Copyright Lenovo 2024.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925