ThinkSystem SR950 V3 4x E3.S EDSFF NVMe PCIe 5.0 Backplane Option Kit

See this document for information about the ThinkSystem SR950 V3 4x E3.S EDSFF NVMe PCIe 5.0 Backplane Option Kit.

This option kit comes with the following components.

1 One E3.S drive cage

2 One E3.S cable assembly

NOTE

• The illustration in this document might differ slightly from your hardware.
• The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

• To install the option, refer to:
  • "Install a drive cage" in SR950 V3 User Guide
  • "Internal cable routing" in SR950 V3 User Guide
• For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.

Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (September 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925