ThinkSystem SR645 V3/SR635 V3 4x2.5" NVMe Front Backplane Option Kit
See this document for information about the ThinkSystem SR645 V3/SR635 V3 4x2.5" NVMe Front Backplane Option Kit.
This option kit comes with the following components.
1 One 4x2.5 AnyBay backplane with long bracket
2 One 1U 4x2.5" NVMe HDD Type label
3 One 1U V2 2x3 2.5" drive filler
4 Four 1X1 2.5" driver fillers
NOTE
- The illustration in this document might differ slightly from your hardware.
Option installation
- To install the option, refer to the applicable user guide:
| Server model | Hardware installation | Internal cable routing |
|---|---|---|
| SR635 V3 | Install the front 2.5-inch drive backplane | Internal cable routing |
| SR645 V3 | Install the front 2.5'' drive backplane | Internal cable routing |
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
| Option installation | |
|---|---|
| To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
| For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. | |
First Edition (April 2023)
© Copyright Lenovo 2023.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925