ThinkSystem ST250 V3 6x3.5" Simple Swap SATA + 2x3.5” Simple Swap NVMe Backplane Kit

See this document for information about the ThinkSystem ST250 V3 6x3.5" Simple Swap SATA + 2x3.5” Simple Swap NVMe Backplane Kit.

This option kit comes with the following components.

1 One 3.5" inch drive cage

2 One 9225 front fan

3 Four 3.5 inch drive fillers

4 One 3.5" inch simple swap backplate

NOTE

• The illustration in this document might differ slightly from your hardware.

Option installation

• To install the option, refer to:
  • "Install the 3.5-inch simple-swap drive backplate" in ST250 V3 User Guide
  • "Internal cable routing" in ST250 V3 User Guide
• For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.

Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (October 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925