Skip to main content

ThinkSystem SR650 V3 Middle 4x3.5" SAS/SATA Backplane Option Kit

See this document for information about the ThinkSystem SR650 V3 Middle 4x3.5" SAS/SATA Backplane Option Kit.

This option kit comes with the following components.

ThinkSystem SR650 V3 Middle 4x3.5-inch SAS/SATA Backplane Option Kit

1 One 4x3.5" SAS/SATA backplane​

2 One 4x3.5" middle drive cage​

3 Four 1x1 3.5" HDD fillers​

4 Two 2U performance heatsinks​

5 Two MCC CPU carriers​

6 Two XCC CPU carriers​

7 One super capacitor holder​

8 One drive sequence label (32–35)​

9 One M3 screw​

10 Two top cover support sponges​

11 One power cable, 170 mm​

12 One power cable, 300 mm​

NOTE
  • The illustration in this document might differ slightly from your hardware.
  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (July 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925