Skip to main content

ThinkEdge SE350 V2 7mm SSD Module

See this document for information about the ThinkEdge SE350 V2 7mm SSD Module.

This option kit comes with the following components.

ThinkEdge SE350 V2 7mm SSD Module

1 7mm drive module

2 Four 2.5-inch 7mm drive dummy fillers

3 One NVMe drive cable (BP1), 250mm

4 One NVMe drive cable (BP2), 300mm

5 One SATA drive cable (BP1), 220mm

6 One drive BP power cable, 85mm

  • The illustration in this document might differ slightly from your hardware.
  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website

First Edition (July 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925