ThinkSystem SR665 V3 7mm NVMe 2-Bay RAID Enablement Kit
See this document for information about the ThinkSystem SR665 V3 7mm NVMe 2-Bay RAID Enablement Kit.
This option kit comes with the following components.
1 One riser 1/2 cage
2 One Gen4 x16/x16/E riser card
3 One 7mm drive cage support clip
4 One 7mm drive cage for riser cage
5 One 7mm drive cage
6 One 7mm backplane top
7 One 7mm backplane bottom
8 Two 7mm tray fillers
9 Two M3 screws
10 Eight M3.5 screws
11 Three labels
- PCIe sequence label (1–2)
- PCIe sequence label (4–5)
- 7mm drive type label NVMe
12 One power cable, 210 mm
13 One LP SlimSAS x4 to SlimSAS x4 cable, 125 mm
14 One LP SlimSAS x4 to SlimSAS x4 cable, 250 mm
- The illustration in this document might differ slightly from your hardware.
- The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.
- To install the option, refer to:
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.